木工加工棚一般需根據施工計劃，安置鋼筋對焊機、切斷機、彎曲機、調直機等設備的數量及加工流水線；另還需考慮部分鋼筋原材料、加工后鋼筋的周轉及堆放；現場施工場地、用電等條件來確定。木工加工棚的搭設還要注意幾點：

Generally, the woodworking shed shall be equipped with the number and processing lines of steel butt welding machines, cutting machines, bending machines, straightening machines and other equipment according to the construction plan; In addition, it is also necessary to consider the turnover and stacking of some reinforcement raw materials and processed reinforcement; The site construction site, electricity and other conditions shall be determined. Several points should be paid attention to when setting up the woodworking shed:

木工加工棚的搭設還要注意一下幾點：

The following points should also be paid attention to when setting up the woodworking shed:

1.工具式木工加工棚搭設具體尺寸根據現場實際情況確定。

1. The specific size of the tool type woodworking shed shall be determined according to the actual situation on site.

2.搭設在塔吊回轉半徑和建筑物周邊的加工車間設置雙層硬質防護。

2. The processing workshop set up at the slewing radius of the tower crane and around the building shall be provided with double-layer hard protection.

3.加工車間地面需硬化，宜選用砼地面。

3. The ground of the processing workshop should be hardened, and the concrete ground should be selected.

4.加工車間頂部應張掛警示標識和宣傳用語的橫幅，橫幅寬度宜為1m。

4. The top of the processing workshop shall be hung with warning signs and banners of advertising language, which should be 1m wide.

5.工具式鋼筋加工棚需在醒目處掛操作規程圖牌，圖牌的尺寸為：寬×高=2000mm×1000mm。

5. Tool type reinforcement processing shed shall be hung with operation instruction board at a conspicuous place. The size of the board is: width × Height=2000mm × 1000mm。

6.各種型材及構配件規格為參考值，具體規格應根據當地風荷載、雪荷載進行核算。

6. The specifications of various profiles and components are reference values, and the specific specifications shall be calculated according to the local wind load and snow load.

7.南方地區，如遇臺風應采取防風措施，可設置纜風繩。

7. In the south, in case of typhoon, windproof measures should be taken, and wind ropes can be set.

以上幾點就是問題的相關解答了，希望能夠幫助到您，您對此有什么想法可以隨時來我們網站http://www.siemax-cx.com咨詢吧！

The above points are the answers to your questions. I hope they can help you. If you have any ideas, please come to our website at any time http://www.siemax-cx.com Consult!